To see this working, head to your live site.

Different behaviour between DIN and USB

I am using a 1010 Blackbox as sample player.

The Arp works nicely when using Midi Out DIN > TRS Midi In. I can assign channels to the pads and each arp plays them.

However when I go USB Midi > USB Midi no notes are played. Some midi is getting through, as it "starts" the Blackbox playing.

I can however use the Arp USB Midi on a computer with a software sampler.

Any clues as to where the problem might be? The Blackbox can power the Arp via Midi Device port so that would be really helpful to cut down on cables.

Thanks !

4 comments

Comments (4)

Nigel Godfrey

Dec 04, 2024

Thanks. Very much appreciate the help. Midi Control is off.

I dug out my NDLR (sorry!) and that is working as expected in the same setup, but I do wonder if there is something going on with clock. The BB is neither sending not receiving clock. If I use the NDLR and disable the internal clock the nothing happens. But not matter what I try with the ARP i cannot get a single note to play.